Using the AspireAssist
Operation
Step 1:
With the Drain Clamp closed,
attach Connector to Skin-Port
and rotate lever clockwise
Disconnect and Rinse
Step 1:
Rotate lever counter-clockwise to
disconnect Connector.
Step 2:
115
cycles
Open Drain Clamp to begin
draining.
Step 2:
Open Drain Clamp and press Tubing
Release button to remove T-Fitting
and tubing. Press reservoir release
button to release Reservoir.
Step 3:
Once draining stops, close Drain Clamp
and squeeze Reservoir to flush about a
quarter of the water into the stomach.
Repeat steps 2 and 3 until clear water
flows out and your stomach feels
empty.
Step 3:
Rinse all components in the sink.
Store in carry bag. Note: See Users
Manual for complete cleaning
instructions.
5