Technical Data; Vibration Information; English - Milwaukee M18 HCCT109/42 Manual Original

TECHNICAL DATA

Crimping Tool
Production code
Frequency band
Radio-frequency power
Battery voltage
Nominal force
Compression range : Diameter max.
Copper
Aluminium
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah...12,0 Ah)
Recommended Ambient Operating
Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty
K=3dB(A))
Sound power level (Uncertainty K=3dB(A)) 86,7 dB (A)

Vibration information

Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission valuea
h
Uncertainty K=
Crimping dies
Connectors
Crimping dies
Connectors
M18HCCT109/42
4587 30 01...
... 000001-999999
2402 - 2480 MHz
1,8 dBm
18 V
109 kN
400 mm²
300 mm²
5,6 kg ... 6,6 kg
-18°C ... +50°C
M18B ..., M18HB ...
M12-18...
75,7 dB (A)
0,5 m/s
2
1,5 m/s
2
Milwaukee DIN13 CU Serie
DIN 46235
16 - 300 mm
2
Milwaukee R13 CU Serie
Tubular lug
400 mm
2
WARNING!
The vibration and noise emission level given in this information
sheet has been measured in accordance with a standardized test
given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main
applications of the tool. However if the tool is used for di erent
applications, with di erent accessories or poorly maintained, the
vibration and noise emission may di er. This may signi cantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise
should also take into account the times when the tool is switched
o or when it is running but not actually doing the job. This may
signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
e ects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
3
2
1
9
10
8
Device description
1 Rubber boot
2 Crimping jaws
3 Hanger
4 LED /Crimping indicator
5 ONE-KEY battery door
6 ONE KEY indicator
7 Handle
Insulated gripping surface
8 Release trigger
9 Trigger
10 Die release pins
11 Battery
4
5
6
7
11

English

13
GB