Residual Risk; Specified Conditions Of Use - Milwaukee M18 HCCT109/42 Manual Original

LED indicator
Solid Green
Solid Red
Flashing Red
Flashing Red / Green
(after Solid Green or
GB
Solid Red)
WARNING Read all safety warnings, instructions, illus-
trations and speci cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
CRIMPING TOOL SAFETY WARNINGS
The operator of this device must be instructed in the speci c dan-
gers associated with using this device and in the essential safety
measures before working with it for the rst time and at least once
a year thereafter.
The operating company must:
• make the operating manual available to the operator and
• ensure that the operator has read and understood it.
Maintain labels and nameplates. These carry important informati-
on. If unreadable or missing, they have to be replaced.
Always use common sense and be cautious when using tools. It
is not possible to anticipate every situation that could result in a
dangerous outcome. Do not use this tool if you do not understand
these operating instructions or you feel the work is beyond your
capability; contact Milwaukee Tool or a trained professional for
additional information or training.
Keep hands and loose items of clothing away from crimping jaws
/ dies and other moving parts. There is a risk of serious injury,
including severing of limbs.
Use protective equipment. Always wear goggles when using the
machine. The use of protective clothing is recommended, such as
dust mask, protective gloves, sturdy non-slip footwear, helmet and
ear defenders.
To reduce the risk of injury, wear safety goggles or glasses with side
shields when operating or servicing the tool. Material may crack
or shatter.
Never hold your ngers or other body parts in the working area
of the cylinder or the press jaws. Crimping tools and crimping
devices must only be used by trained personnel in electrotechnical
applications.
Check crimping tool, jaws and dies for cracks and other signs of
wear before each use.
English
14
De nition
Tool completed the operation and reached
full crimping pressure.
Tool completed the operation but did NOT
reach full crimping pressure.
Tool did NOT complete the operation.
Tool has reached its service interval (30000
crimps). Red/Green ashing will begin
after the solid Red or Green indicator for
the operation is displayed. MILWAUKEE
recommends that the tool be inspected and
preventative maintenance completed.
Only use crimping tools and crimping dies that are in perfect
technical condition.
Only use the crimping tool with crimping dies inserted into it.
Only use crimping dies up to 120 kN and with a total width of 35
mm.
Remove any setting tools and wrenches before crimping.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.
Do not touch the press jaws during the pressing operation.
In the event of problems during the crimping process, immediately
release the ON switch and press the unlocking button on the
hydraulic system. The valve will open and the piston will return to
its initial position.
Remove the battery pack before starting any work on the
appliance.
Compliance with the speci ed service work and service intervals is
mandatory.
Have damage repared immediately by an authorised workshop.
Do not work on electrically live parts. Tool is NOT insulated.
WARNING!To reduce the risk of re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in uid or allow a uid to ow inside them.
Corrosive or conductive uids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., Can
cause a short circuit.
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
WARNING
This device contains a button-type/coin cell lithium battery.
A new or used battery can cause severe internal burns and
lead to death in as little as 2 hours if swallowed or if it enters the
body. Always secure the cover on the battery compartment. If it
does not close securely, stop the device, remove the battery and
keep it out of reach of children. If you believe that someone has
swallowed the battery or that it has otherwise entered the body,
seek immediate medical attention.

RESIDUAL RISK

Never crimp live connecting materials.
Failure to comply with this instruction can lead to serious injury,
death, re and other damage to property as a result of electric
shock, explosion and/or electric arcs.
Wear goggles.

SPECIFIED CONDITIONS OF USE

The crimping tool is exclusively designed for crimping connectors
and compound materials with dedicated crimping dies.
All live parts, i.e., parts conducting electricity, must be discon-
nected in the technician's work environment prior to starting work.
WARNING Read all safety warnings, instructions, illus-
trations and speci cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.