Recovery - Philips NIKE psa[128max Manual Del Producto

Ocultar thumbs Ver también para NIKE psa[128max:
Tabla de contenido

Publicidad

recovery

my psa hangs on certain tracks
psa cannot be corrected even after using the Format application to format the psa
memory.
psa won't switch on, but responds and can be detected when I connect it to my PC.
check out solutions from the helpful tips (see page 27-28) first. need more help?
the firmware on your psa may have been corrupted. to solve this, try the following
recovery application. this will then update your firmware.
1
disconnect the psa from your PC and remove the battery.
2
connect the psa to your PC.
press and hold 2; on the psa. while 2; is
3
pressed, insert a battery (new battery
recommended) and continue holding 2; .
continue holding 2; for a further 6 seconds.
4
this extra time allows your psa to enter the
recovery mode.
5
Click Start
application
display shows
6
if you are prompted with a firmware download message, The firmware update has
detected your device in firmware recovery mode. Currently, the drivers are loading on
your system. Please wait until the drivers have completed loading, and then run the
firmware update utility again, click OK and start the same recovery application once
again. if the firmware download message does not appear, skip directly to step 7.
a recovery window appears showing details of your psa's software version.
Programs
Nike psa[128 Player
recovery (for Windows OS users only) 25
Recovery to start the recovery

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nike act21017

Tabla de contenido