Trimming; Cleaning - Philips Norelco SPECTRA 8 8867XL/43 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
14
2
Stretch your skin with your free hand so
blades can lift and cut whiskers. Gently
press razor to skin, so the floating heads
can follow the contours of your face. DO
NOT press too hard.Too much pressure
can pinch the skin into the combs.
3
Turn razor OFF.
C
4
Put the protective razor head cap on the
razor to protect razor heads.
Replace Spectra razor heads (model # HQ8)
once a year for optimal shaving results.

Trimming

To groom sideburns and moustache:
1
Turn razor ON.
C
2
Push up Trimmer Slide Switch.
The Trimmer can be activated while the razor is
running.
C
3
Hold Trimmer as shown and move in
downward strokes with gentle pressure.
4
Close Trimmer by sliding Trimmer switch
down.
5
Turn razor OFF.

Cleaning

Every week: Razor Heads
C
The easiest and most hygienic way to clean the
razor heads is to rinse them every week with hot
water.Water from the tap should be on a hot
setting.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
Regular cleaning guarantees better shaving
results.
You may also quickly rinse your razor heads
after each use.
1
Aways turn razor OFF, unplug from outlet
and remove cord from razor before
cleaning.
C
2
Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3
Clean razor heads and hair chamber by
running under hot water.
4
Close the Razor Head Assembly and shake
off excess water.
C
5
Open Razor Head Assembly again and
leave open to air dry.
6
You may also clean the hair chamber
without water by using the supplied brush.
ENGLISH
15

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Norelco spectra 8 8865xl

Tabla de contenido