AGPtek K2 Manual Del Usuario página 7

" Presets". While is on radio playing interface, tap to switch among preset stations.
- "Save to preset". Save the station you are listening to " Presets" .
- "Clear preset". Click "Clear preset" to enter the preset list, choose the station you
want to clear, then tap and choose yes to clear the preset station.
 Start FM radio recording
Choose "Start FM Radio Recording", tap button to pause/continue, tap the button
and select "yes" to save the recording file.
Find the radio recordings in FM radio > FM recording. The radio recordings will also be
saved in Recordings > Recordings library.
 Turn off radio background
While it's on radio playing interface, tap and choose "Yes" to turn off the radio
playing background.
Note:
1．When using the radio function for the first time or when there is no station, the station
can be added by [Station list], [Manual Tune], [Auto Tune].
2．If you can't search for an FM radio station, or if the FM sound quality is not good,
please try adjusting the position of the wired headset or antenna. In some remote places,
the FM signal may be poor. Please contact the local staff working in FM broadcasting to
confirm whether the FM signal is covered or not.
3．FM radio supports listening with the wired earphones/Bluetooth connection.
(1) Wired earphones listening. Before turning on the FM radio, you should
connect to the wired earphones for listening.
(2) Bluetooth connection listening. You can use the wired earphones or
antenna to receive the signal, and then connect Bluetooth devices.
Bluetooth
Find "Bluetooth" on "Tools" and tap to access to its function.
 Bluetooth On/Off. Choose to enable or disable Bluetooth.
 Bluetooth On/Off memory.
Choose On-the player will connect with devices that have been connected by its Bluetooth
automatically, when you turn on the player next time. (The Bluetooth devices must be
powered on and unoccupied)
5