Tripp-Lite DMCS60100XX El Manual Del Propietario página 4

1. Assembling the Base
Left Leg
• Insert the right leg into the base. Align the holes in the right leg to the holes in the base. Secure with the
screws. Repeat this step for the left leg.
• Each caster can be adjusted independently for fine tuning. Slightly turn the nut to lower or raise the base.
2. Adjust Column Height
CAUTION: Hold the inner column
when loosening the screws to
adjust height.
Repeat this step for the left column.
Note: Make sure both columns are at the same height using the height indicator as guide.
18-03-072-93380F.indb 4
Middle Base
M6x16
Right Leg
Hex Key
Hex Key
Right Column
Adjust to the desired height,
then tighten all screws.
4
Wrench
Hex Key
4/30/2018 3:24:57 PM