Connect The Water Supply - Kohler K-5724 Guía De Instalación Y Uso

Filter
Or
T-Valve
Supply
Stop

3. Connect the Water Supply

CAUTION: Risk of property damage. Do not push or pull
on the water connection between the seat and the water
supply stop. This will prevent water leakage.
NOTICE: Use care to avoid cross threading or overtightening the
connections. Unless otherwise indicated, use an adjustable wrench to
tighten one-quarter turn past hand-tight.
Connect the T-valve to the seat hose.
If needed, connect the supply hose to the supply stop.
Connect the supply hose to the T-valve.
Confirm the filter is in place. Install if needed.
Install the seat hose to the orange colored inlet.
IMPORTANT! The white cap must be in place on the side opposite
the seat hose.
Connect the T-valve to the water inlet on the toilet tank.
Turn on the water supply.
Kohler Co.
Filter
Hose
Supply Hose
5 1263904-2-C