6. Secure the Tank
CAUTION: Risk of product damage. Do not overtighten the mounting nuts. Do not shorten the
T-bolts.
Place a washer on each T-bolt.
Thread a nut onto each T-bolt.
Hand tighten the nuts.
7. Connect the Water
IMPORTANT! If this installation replaces an existing toilet, a hose other than the one shipped with the
water supply may be used. Use a stainless steel, burst-resistant hose.
NOTE: This installation is configured to accept a floor water supply. A wall supply is also acceptable.
Connect the water.
Open the shut-off valve.
Kohler Co.
Nut
Washer
T-Bolt
Base of
Tank Unit
7
Floor supply shown.
Flexible Hose
1035530-2-C