Safety Information - Silvercrest 600 A1 Instrucciones De Uso

Safety information

DANGER! RISK OF ELECTRIC SHOCK!
Connect the appliance only to a properly installed and
►
easily accessible mains power socket supplying a mains
power voltage of 220 – 240 V ∼, 50 – 60 Hz.
Use the appliance only with the supplied mains cable.
►
Ensure that the mains cable never gets wet or damp when
►
the appliance is in use. Route the cable so that it cannot
be trapped or damaged in any way.
Make sure that the mains cable socket never comes into
►
contact with water! Allow the mains cable socket to dry
completely if it accidentally gets wet.
Make sure that no liquid runs over the appliance's mains
►
plug connections.
To avoid potential risks, if the appliance power cable is dam-
►
aged, it must be replaced by the manufacturer, its customer
service or by a qualified technician.
Always disconnect the plug from the mains power socket
►
after use.
Check the appliance for visible external damage before
►
use. Do not operate an appliance that has been damaged
or dropped.
All repairs to the appliance must be carried out by autho-
►
rised specialist companies or Customer Service. Improper
repairs may put the user at risk. It will also invalidate any
warranty claims.
Never immerse the appliance in water or other liquids!
There is a risk of a fatal electric shock if liquid gets onto
live parts during operation.
SET 600 A1
GB │ IE │ 3 ■