Junghans W615.97 Manual Del Usuario página 10

48
You use the 'ON/OFF' button to
turn the alarm on or off. If the
alarm is active, the indicator 'ON' is
shown in front of the 'ALARM'
menu item on the LCD display.
When the alarm time is reached
an acoustic signal sounds.
Once the alarm has gone off, it is
no longer active. If you want to use
the alarm again, please set it and
activate it as described above.
Press the 'MODE' button repeated-
ly until you reach 'TIMER' mode.
You set the timer using the 'SET+'
and 'SET–' buttons. If you press
briefly the display moves a second
at a time. If you press for longer,
the setting changes rapidly.
You use the 'ON/OFF' button to
turn the timer on or off. If the
timer is active, the indicator 'ON' is
shown in front of the 'TIMER'
menu item on the LCD display.
When the timer gets to 0:00:00',
an acoustic signal sounds.
49