Junghans W615.97 Manual Del Usuario página 9

46
The chronograph is started and
stopped again using the 'SET+'
button. When the chronograph is
running,'ON' is displayed in front of
the 'CHRONO' item on the menu.
Pressing the 'RESET' button resets
the counted time to '0:00:00.0'.
The reset function can only be
used once the chronograph has
already been stopped. When the
chronograph is running, the cur-
rent split time can be displayed by
pressing the 'SET–/SPLIT' button
for about 5 seconds. The chrono-
graph continues running in the
background.
Press the 'MODE' button repeated-
ly until you reach ' A LARM' mode.
You set the alarm time by using
the 'SET+' and 'SET–' buttons. You
can adjust the time by the minute
by pressing either button briefly or
adjust it in fast forward or fast
rewind mode by holding the rele-
vant button down for longer.
47