Fluids; Operator's Obligations - Wilo Actun OPTI-QS Serie Instrucciones De Instalación Y Funcionamiento

English
2.6.

Fluids

Each fluid differs in respect of composition, corrosiveness, abrasiveness, dry matter
content, and in many other aspects. Generally, our pumps can be used for many applica-
tions. Please note that if requirements change (density, viscosity or general compositi-
on), this can also affect many operating parameters of the pump.
If the pump is used in or switched over to a different fluid, observe the following:
• For use in drinking water applications, make sure that all parts that come into contact
with the medium are suitable for such use. This must be checked in accordance with
the local regulations and laws.
The pumps must not be used in wastewater and sewage and/or with fluids that are
hazardous to health.
2.7.

Operator's obligations

• Provide the installation and operating instructions in a language that personnel can
understand.
• Ensure the required level of training of personnel for the specified work.
• Provide the required protective equipment and ensure that the personnel wear the
protective equipment.
• Ensure that the attached safety and information signs on the product are always legible.
• Instruct personnel in how the system operates.
• Eliminate any potential risks posed by electricity.
• Fit dangerous components within the system with an on-site guard.
• Secure and mark the work area.
• Define a personnel work plan for safe workflow.
Children and persons under 16 years of age or with limited physical, sensory or cogni-
tive capacities are prohibited from handling the product! Persons under 18 years of age
must be supervised by a technician!
50
SAFETY
WILO SE 02-2019 DIN A5