Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol
Meaning
Laser radiation
Do not view directly with optical
instruments
Class 1M laser product
Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in contact
with the saw blade.
Wear ear protectors. Exposure to
noise can cause hearing loss.
Wear safety goggles.
Wear a dust respirator.
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for stationary use with saw blades to
perform lengthways and crossways straight cuts and miter
angles to 45° in metal materials without the use of water.
Bosch Power Tools
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Locking lever
2 Laser protection cap
3 Spindle lock
4 Retracting blade guard
5 Chip box
6 Angle stop
7 Clamping spindle
8 Quick-release button
9 Spindle handle
10 Clamping lever of the saw-table extension
11 Saw-table extension
12 Hex key (size 6 mm)/cross-head screwdriver
13 Tension handle to lock the angle stop
14 Transport safety-lock
15 Blade guard
16 Handle
17 On/Off switch
18 Laser warning label
19 Laser on/off switch (for marking of cutting line)
20 Transport handle
21 Cover plate
22 Bracket
23 Mounting holes
24 Chip drawer
25 Saw table
26 Lower fastening screw
(cover plate/retracting blade guard)
27 Upper fastening screw
(cover plate/retracting blade guard)
28 Guide bolt
29 Hex socket screw (size 6 mm) for mounting of saw blade
30 Clamping flange
31 Saw blade
32 Interior clamping flange
33 Angle display
34 Scale for miter angles
35 Adjustment screw for laser position
(parallelism)
36 Screw for angle display
37 Laser beam outlet
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
English | 19
1 609 92A 0XZ | (3.9.14)