pico Technology PicoScope 6000E Serie Guia De Inicio Rapido página 7

Quick Start Guide
2.1 Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols
Direct current
Alternating current
Earth (ground) terminal
Chassis terminal
Equipment protected throughout by double
insulation or reinforced insulation
Possibility of electric shock
Caution
CAT
EN 61010 overvoltage category
Do not dispose of this product as unsorted
municipal waste
To prevent injury or death use the product only as instructed. Protection provided by the product may be impaired if
used in a manner not specified by the manufacturer.
2.2 Maximum input/output ratings
Observe all terminal ratings and warnings marked on the product.
The table below and markings on the product indicate the full scale measurement range and overvoltage protection
range for each oscilloscope model. The full scale measurement ranges are the maximum voltages that can be
accurately measured by the instrument. The overvoltage protection ranges are the maximum voltages that will not
damage the instrument.
To prevent electric shock, do not attempt to measure voltages outside of the specified full scale measurement
range.
DO338-2
Description
WARNING
WARNING
Copyright © 2020 Pico Technology Ltd. All rights reserved.
PicoScope 6000E Series oscilloscopes
The terminal can be used to make a
measurement ground connection. The
terminal is NOT a safety or protective earth.
Appearance on the product indicates a need to
read this Safety and all operation instruction.
3