MACAP CPS Manual Del Usuario página 7

INSTRUCTIONS FOR THE CORRECT ADJUSTMENT OF CPS HANDLE
Picture 5
1) Unscrew anticlockwise the insert C using a 3 mm hexagonal wrench.
2) With the same wrench screw out the insert B for a half turn. At the same time use a slot screwdriver to offer resistance to the
tension regulator A (so as not the internal screw spring to return in rest position).
3) Set the winding of the spring turning anticlockwise the tension regulator A to boost the winding (turn clockwise to get the
opposite effect). The adjustment of the winding has to be reduced to avoid an abrupt and noisy handle reversal.
4) Once ended the adjustment of the winding, close firmly the insert B constantly gripping the slot screwdriver. Finally screw the
insert C to prevent the insert B from unscrewing caused by vibrations when using the machine.
FURTHER INSTRUCTIONS
Packaging disposal: Following removal of the appliance from its packing, dispose of the packing materials according to the
local current regulations.
Final disposal of the appliance: At the end of its service life, do not discard the appliance in the environment, but rather
dismantle and dispose of it in accordance with local regulations governing the various materials used for its construction.
It is recommended that such operations be performed by a qualified disposal Company.
DO NOT DISCARD IN THE ENVIRONMENT.
WARRANTY
The machine is guaranteed for a period of 12 months from the date of purchase. Defects resulting from normal wear or caused
by improper use of the product are not covered by the warranty. If you interfere with the machine the warranty automatically
becomes invalid.
6
ENGLISH