Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
E
When the hose 12 is not fitted, the hole can be closed with the
flange cap 11 .
NOTE: When installing the air conditioner semi-permanently,
you should leave a door slightly open (as little as 1/2" (1 cm))
to guarantee correct ventilation.
AIR-CONDITIONING WITHOUT INSTALLATION
•
Screw the window outlet 17 to the other end of the
exhaust hose (see fig. F).
F
Sash window
•
Open the window.
•
Place the window bracket 15 in the window, extending it
to fit the width of the window (fig. G).
•
Place the air conditioner near the window. Insert the
assembled exhaust hose 12 into the window bracket hole
15.
•
Make sure the air exhaust hose is unobstructed.
•
If you have a very large window, in order to cover your
window aperture, use the additional window bracket
without holes extending it to the desired dimension, then
fix the bracket by using the locking pin provided. When
extracting the window bracket and joining the two pieces
pay attention you do not cover the hole.
MAX 39 inches
MAX100 cm
MAX 14 inches
MIN 35 cm
Other set-up methods:
•
Keep the air hoses as short and free of curves as possible to
avoid constrictions.
French window
•
6
Preparing for use
Thanks to the locking pin, it's possible to use the window
bracket also for sliding windows. Position the hole of the
bracket so to allow a correct installation of the exhaust
hose (see figure H).
After having screwed the window outlet 17 into the air
exhaust hose 12 , open the French window slightly and
position the window outlet 17 as shown in figure I.
I
en
G
H
Publicidad
Tabla de contenido
