Power Supply; Location - La Sommeliere ECELLAR185 Manual De Instrucciones

Power supply

Connect the wine cellar to a single, wall-mounted type E socket.
The cellar must be plugged into a single, easily accessible socket.
All questions relating to power and / or earthing must be handled by qualified personnel (electrician,
authorized service).

Location

•
Warning ! The cellar must be placed in a clean environment (not dusty), frost-free, away from
a heat source, type: radiator, oven, sunlight, etc ... it must not be installed outdoors.
• Place the cellar in a location strong enough to support the full load weight.
• To level it adjust the height of the adjustable feet below the cellar.
This device is suitable for operation in rooms with a very specific ambient temperature, this climatic
class is indicated on the rating label.
N: This refrigeration appliance is intended for use in ambient temperatures between 16°C and 32°C.
The ambient temperature affects the interior temperature and humidity of your cellar.
The temperature of the device is adjustable between 5°C to 20°C. The temperature is regulated by a
thermostat. Changing the temperature generates higher energy consumption.
The device ensures that the temperature is maintained as long as it is in operation and is used under
normal conditions of use. The temperature inside the appliance and its energy consumption can be
influenced by many factors: ambient temperature, exposure to the sun, number of door openings and
quantity stored... Slight changes in temperature are perfectly normal and correspond to cooling cycles
of the device. But these variations in no way affect the storage temperature of the wines, these
variations being too short for heat exchange with the bottles.
Handle installation
•
Remove the handle and its two screws from the plastic bag inside the cellar.
•
Before installing the handle, you must remove the door seal on a part. This does not affect
the seal of the gasket if you take care to remove it correctly.
52