Changing the carbon filter
Your wine cellar is equipped with a charcoal filter, which is positioned at the bottom right corner of your
cellar. We recommend that you replace it once a year. To replace it, simply pull it out from inside the
cellar and put a new filter back in.
In the event of a power cut
The majority of power outages are resolved within a short period of time.
A shutdown of 1 or 2 hours will not affect your cellar temperatures.
To protect your wines during power cuts, consider minimizing the number of door openings.
For very long power cuts, take the necessary measures to protect your wine.
o
If the device is unplugged, turned off or there is a power cut, you must wait 3 to 5 minutes
before restarting it. If you try to restart it before this time, the compressor will start only after 3/5
minutes (if the temperature requires it).
o
At the first start-up and following a prolonged shutdown of the cellar, it is possible that when
restarting the temperatures chosen and those displayed do not correspond. This is normal. It
will then be necessary to wait a few hours before the temperatures regain their stability.
o
In the event of a power cut, the device stores the set temperatures in memory. When the
appliance is put back into service, it is therefore unnecessary to reprogram the cellar
temperatures.
Warning ! During a power cut, the E-cellar no longer records movements, so avoid modifying
the wine stock.
When the power is turned on again, the cellar will update the stocks in order to detect the
release or addition of a new bottle.
If an add or remove operation is performed via the app, it will save the changes, but if it is a free
action (without going through the app) and a bottle is removed and replaced by a new one at
the same location, the cellar will not make the distinction when it is restarted.
71