Switching On/Off - Milwaukee LM 60 Instrucciones De Uso

GB
abnormal use, and before, during and after important
D
measurements.
F
Make sure the Milwaukee LM 60 optic is kept clean
and that there is no mechanical damage to the
I
bumpers.
E
CAUTION:
P
In using the instrument for distance measure-
NL
ments or for positioning moving objects (e.g. cranes,
DK building equipment, platforms, etc.) unforeseen
events may cause erroneous measurements.
NO
Precautions:
S
Only use this product as a measuring sensor, not as
FIN
a control device. Your system must be configured and
GR
operated in such a way, that in case of an erroneous
measurement, malfunction of the device or power
TR
failure due to installed safety measures (e.g. safety
CZ
limit switch), it is assured that no damage will occur.
SK

Switching on/off

PL
HU 1x briefly: the instrument and the laser are
switched on.
SLO
HR The display shows the battery symbol
the next button is pressed.
LV
LT Pressing this button for longer switches the
instrument off.
ET
RU The instrument switches off automatically after
three minutes of inactivity.
BG
RO
MK
Operation
CN
Setting the instrument
Press long until the desired unit is displayed.
Possible units:
Distance
1. 0.000 m
1
2. 0'0'' /
16
1
3. 0 in /
16
4. 0.00 ft
CLEAR-Key
1x briefly: the last action is cancelled.
Illumination
1x briefly: the display illumination is switched on
or off.
until
4
Area Volume
0.000 m² 0.000 m³
0.00 ft² 0.00 ft³
0.00 ft² 0.00 ft³
0.00 ft² 0.00 ft³
Milwaukee LM 60