Milwaukee LM 60 Instrucciones De Uso página 14

GB
If the button is pressed for along time while
D
measuring a distance, maximum or minimum contin-
F
uous measuring is activated.
I
Stake out function
E
This function is helpful when staking out equal
P
distances, e.g in the erection of wooden substruc-
NL
tures. See drawing
DK
5x briefly: the
NO
A value is displayed in the summary row (default
S
value 1.000 m). This value can be adjusted to the
desired stake out distance.
FIN
The value is increased.
GR
The value is reduced.
TR
Holding the button down accelerates the speed at
CZ
which the value changes.
SK
1x briefly: starts continuous measurement.
PL
In intermediate line 1, the set distance or the next
HU
appropriate multiple thereof is displayed.
SLO
In the summary row, the distance to the next appro-
HR
priate stake out point is displayed.
LV When approaching a stakeout point (to less than
0,10 m), the instrument starts to beep. When the
LT
point is reached, the beep sound changes and inter-
ET
mediate line 1 starts to flash.
RU
1x briefly: distance measurement is interrupted
and the instrument switches back to individual
BG
distance measuring mode.
RO
MK
Functions
CN
symbol is displayed.
Historical memory
1x briefly: the
value are displayed.
Use the "+" or "-" buttons to navigate through the
last 10 values. The values can also be used in func-
tions.
Using stored values in functions
Using added distances in area functions (e.g. wall
surfaces or painters):
Adding distances (see additions / subtractions)
Call up area function to e.g. measure the height
of a room.
1x briefly: calls up the historical memory and to
possibly search for the correct value.
1x long: the value is entered into the function
and the result of the function (e.g. area) is
displayed.
Timer (self-triggering)
1x briefly: The
The timer is preset to 5 seconds.
The value is increased.
The value is reduced.
8
symbol and the last measured
symbol is displayed.
Milwaukee LM 60