Connecting to a COMMON INTERFACE slot (Your TV
viewing Card Slot)
✎
Turn the TV off to connect or disconnect a CI card.
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
•
If you don't insert the "CI or CI+ CARD", some channels will display the
message "Scrambled Signal".
•
The pairing information containing a telephone number, the "CI or CI+
CARD" ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.
•
When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the channel list
is updated.
✎
NOTE
•
You must obtain a "CI or CI+ CARD" from a local cable service provider.
•
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD"
may cause damage to it.
Insert the "CI or CI+ CARD" in the direction marked on the card.
•
•
The location of the COMMON INTERFACE slot may be different depending on the model.
•
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
•
If you have any problems, please contact a service provider.
•
Insert the "CI or CI+ CARD" that supports the current aerial settings. The screen will be distorted or will not be
seen.
[PF5500-TK]BN68-04885B-06L04.indb 12
English - 12
2013-11-13
4:24:36