Care And Cleaning - WeatherTech 55037 Instrucciones De Instalación

Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Again using the same process, remove tape liner from the driver side FAR SIDE EDGE of Hood Protector. Repeat for passenger side.
NOTE: Some applications do not
have side tape by design.
Again using the same process, remove tape liner from the driver
Press firmly along all edges of Hood Protector to ensure
side FAR BOTTOM EDGE of hood protector. Repeat for passenger
adhesion of tape to hood surface.
side.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
© 2016 by MacNeil IP LLC Page 3 of 3