Installation Steps; Care And Cleaning - WeatherTech Easy-On Stone & Bug Deflectors Instrucciones De Instalación

Installation Steps

NOTE: Actual application may vary slightly from illustrations.
Center part on front edge of hood and align holes.
Gently pull the weatherstrip down, and install
NOTE: flanges should be UNDER weatherstrip.
(4) hood inserts in hood, UNDERNEATH the
weatherstrip.
3
4
Install (4) screws with washers on the flanges.
Hood
Hood insert
Hood shield
Washer
Screw
Weatherstrip
5
Close hood. Apply bump ons to surface
of hood
6

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Page 2 of 2
© 2011 by MacNeil IP LLC