How To Install Your Canopy Housing - Fanimation ISLANDER FP320-1 Serie Manual Del Usuario

How to Install Your Canopy Housing

NOTE: This step is applicable after the neccessary
wiring is completed.
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
1. Screw in two threaded rods into the hanger bracket.
(Figure 1)
NOTE: The threaded rods in the hanger bracket
serves as guides for easier installation.
2. Securely attach the canopy housing to the hanger
bracket using the external lockwashers and knurled
knobs supplied with your fan. (Figure 2)
NOTE: Supply wires
and fan wires omitted
for clarity.
Knurled Knobs
5/32˝
Threaded Rods
5/32˝
Lockwashers
12
Threaded Rods (2)
Figure 1
Lockwashers (2)
Knurled Knobs (2)
Figure 2
HARDWARE USED:
X 2
X 2
X 2