Adjust Air Quality Sensor - Coway AP-1512HH Manual De Instrucciones

ADJUST AIR QUALITY SENSOR

1. While the air purifier is on, press the airflow speed
button and ionizer button for 2 seconds.
2. The speed indicator will flash at 1.0 second intervals
with beep. The speed indicator blinks to show the
sensor sensitivity.
3. Adjust the sensitivity by pressing the speed button.
The speed indicator blinks to show the sensor sensitivity.
Speed step 1 Speed step 2
4. Press the airflow speed button and ionizer button
for 2 seconds.
The air purifier will then resume normal operations.
Speed step 3
2 seconds
2 seconds
2 seconds 2 seconds