Sony HVL-F42AM Manual De Instrucciones página 37

Wireless Flash Range
The wireless flash uses a light signal from the built-in flash as a trigger to operate
the off-camera flash unit. Follow the points below when positioning the camera,
flash, and subject.
• Photograph in dark locations indoors.
• If you rotate the flashtube using the bounce-flash function (page 28) so that the
wireless control-signal receiver points toward the camera, it will be easier for the
flash to receive signals from the camera.
• Place the off-camera flash within the gray area in the following diagram.
Distance between camera and subject
• See page 19 or 49 for details on the flash range.
Do not place the flash directly
behind the subject
Place the camera and flash unit
within a 1 to 5 m radius of the
subject
Distance between flash
and subject
37
GB