Using The Device - Duschmeister TRI Manual De Utilización E Instalación

3) Maintenance
-
Switch off the device before any maintenance.
- Twice a year dust off the device to keep it performing at its best.
Do not use abrasive products.
The device has five operational modes:
- "Comfort" mode: The thermostat keeps the room at the
temperature set by the user;
- "Night" mode: room temperature is maintained lower than the
"Comfort" temperature set by the user;
- "Antifreeze" mode: The electronic control keeps the room
temperature always over 7 °C;
- "Timer-2h" mode: The electronic control powers the heating
element at the maximum temperature for a period of 2 hours
regardless of the set temperature. At the end of the 2 hours, the
device returns to previous operational mode. For safety reasons,
during the 2h mode the room temperature is automatically
controlled in order not to exceed 32 °C;
- "Chrono" mode: The electronic control operates according to a
day/week program set by the user.
- During "Stand-by" the heating element is not powered, and all
icons are turned off, however the device is still operating.
- In ''Stand-by'' mode:
the heating element is turned off but the electronic control is
operative.
Other information:
- Big backlit display shows: hour, set temperature and
function/mode.
- 3 preset daily programs and 1 program set by the user.
- ''Open window detection'' Function: this function turns off the
heating element for a max of 30 minutes if there is an open window
in the room, allowing energy saving.

USING THE DEVICE

17
.