Comfort Mode; Night Mode; Antifreeze Mode - Duschmeister TRI Manual De Utilización E Instalación

Press [Prog] to select the desired operative mode. An icon on the
display shows the selected operating mode, according to the
:
following table

COMFORT MODE

The "Comfort mode" keeps the room temperature to a selected
value. To set this operative mode:
-Press [Prog] until the "Comfort" icon appears
-Set the desired temperature using [+] and [-]

NIGHT MODE

In "Night" mode, the temperature is set to a lower value than the
"Comfort mode" temperature.
It is suggested to set this operating mode during the night or when
the room is not used for 2 or more hours.
-Press [Prog] until the " Night" icon appears;
-Set the desired temperature using [+] and [-]

ANTIFREEZE MODE

In "Antifreeze" mode the temperature is fixed to 7 °C. The device
activates the heating element when the room temperature goes
below 7 °C. It is suggested to set this mode when the room is not
used for several days. Press [Prog] until the "Antifreeze" icon
appears.
TIMER 2H MODE
The "Timer 2h" mode can be used to speed up warming of the room
or towel drying.
-Press [Prog] until the icon appears.
The device is activated at the maximum power for 2 hours, up to a
maximum temperature of 32 °C. The "Timer-2h mode" is set to
deactivate automatically after 2 hours and return to the operative
mode previously set. If needed, the user can switch to another
operative mode at any time by simply pressing [Prog].
20