Duschmeister TRI Manual De Utilización E Instalación página 25

ASC Function
In order to decrease the energy consumption, this function allows
to optimize the operating times of the device. By activating this
mode the device will record the time needed to bring a room to the
set temperature, adjusting automatically its operation. This way
the control will turn on later than the set time, if it is possible to
reach the desired temperature in less time than the one
programmed by the user.
Activate Stand-by mode, press the key for more than 3
[Chrono]
seconds, scroll through the modes with the key and select FUN
[+]
with the key. Press it until the icon appears on the
[Prog]
upper part of the display.
Use the [ key to select ON or the [- key to select OFF and
+] ]
confirm with After a few seconds, the control automatically
[Prog].
returns to Stand-By mode.
5)"RESET THE DEVICE"
.
To reset the device it is necessary to unplug it for at least 2 hours
24