Duschmeister TRI Manual De Utilización E Instalación página 24

see the time operation bars for each indicated program.
) KEY LOCK
4
This feature allows the user to lock the keypad to prevent accidental
changes. All buttons on the remote control are locked. To activate
the key lock function, press [Prog] for 3 seconds. The key-lock icon
appears on the display. To deactivate the function, repeat the
procedure. The key-lock icon disappears.
5)"OPEN WINDOW DETECTION"
The "Open Window" function detects when a window is open due
to a sudden decrease of the temperature in the room. To set it
activate the Stand-by mode, press the key for more than
[Chrono]
3 seconds, scroll the modes with the key and select FUN with
[+]
the key. The window icon will flash in the upper part of the
[Prog]
display: use the [ key to select ON or the [- key to select OFF
+] ]
and confirm with
[Prog] .
The icon will be active during the thermostat operation, if an
open window is detected, the icon will start blinking and the
system will turn off the heating for a maximum of 30 minutes or
until the temperature increases of at least 1,5° C.
23