CHRONO MODE
This operating mode allows the user to set different
temperatures along the day, the "Comfort"/"Night" temperatures
and their related time intervals.
-To activate this function, press [Prog] until the "Chrono" icon
appears.
Programming the "Chrono" mode
a) Setting day and time
- Enter in "Stand-by" mode and press [Chrono] for more than 3
seconds. On the upper part of the display the message "Ted" will
appear;
- To set the day and time press [Prog] in the bottom part of the
display the blinking arrow indicates the day of the week. Set the
current day using [+] and [-] and confirm with [Prog].
Now the display shows the time to set. Use the [+] and [-] to set the
correct hour and confirm with [Prog]. Repeat the same steps for
"minutes" and confirm the selected value with [Prog].
- At the end of the procedure, the thermostat returns to the "Stand-
by" mode.
b) Setting the program for the "Chrono" mode
- Enter in "Stand-by" mode and press [Chrono] for more than 3
seconds. On the upper part of the display the message "Ted" will
appear;
21