Measuring Resistance - Steren MUL-052 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MEASURING RESISTANCE

1.- Connect the red testing point to the jack signaled "VΩmA"
and the black testing point to the jack signaled "COM".
2.- Set the dial to Ohms (Ω) range.
3. If the measured resistance is connected to a circuit, turn it off
and discharge the capacitors before to measure.
4.- Connect the testing points to the resistance to be measured.
5.- The resistance value will appear on the LCD display.
ENGLISH-08

Publicidad

Tabla de contenido
loading

Tabla de contenido