Diode Test; Measuring Frequency - Steren MUL-287 Manual De Instrucciones

Diode test

1. Turn the knob to
2. Connect the test tip to the red anode of the diode to be measure and the black one to the
cathode. Realize the measurement.

Measuring frequency

1. Connect the red testing point to "VΩHz" and the black testing point to "COM".
2. Turn the knob to the 20 kHz frequency.
In loud environments, it is preferable to use insulated cables for measurements of small
signals.
Measuring direct current A - - -
1. Connect the red one to the "10 A" terminal and the black cable to "COM".
2. Turn the knob to the "
8 8
Range
(1 mA, 2.8 V)
function.
Range
0-20 KHz
Range
0-20 mA
200 mA
10 A
A" function and realize the measurement.
Precision
± (Reading 1.5%).
Precision
± (Reading 0.8%).
± (Reading 1.5%).
± (Reading 2.0%).