Sauder Pacific View 427035 Instrucciones De Montaje página 28

Hardware Usage Guide
HOW TO USE A TWIST-LOCK
1.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
Step 22
å
Push four SAUDER TWIST-LOCK® FASTENERS (10F) into
the large holes in the DRAWER MOUNTS (P).
10F
Page 28
FASTENER
®
P
2.
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Do not tighten the
TWIST-LOCK® FASTENERS
in this step.
P
Dowel end