Sauder Pacific View 427035 Instrucciones De Montaje página 51

Step 45
å
To make adjustments to the FILE DRAWER, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the cam clockwise or
counter-clockwise. Notice how the drawer raises or lowers as you turn the cam. By adjusting the drawer this way, it will
help the DRAWER FRONT line up better when closed. Tighten the SCREWS when finished with adjustments.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
Cam
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 51