Orbegozo DS 75XXX BL.N Manual De Instrucciones página 16

DS 75XXX BL.N / DS 80XXX BL.N
Advices:
- Ensure carbon filter is well placed. Otherwise, it can fall and damages the hood.
- When the carbon filter is placed, the suction power will be lower.
TOUCH CONTROL
ON/OFF: turn on and turn off the motor.
Speed up: pulse it to increase the suction power of the hood.
Speed down: pulse it to reduce the suction power of the Hood.
Light.
Display digital: it will show the speed of motor: 1, low; 2, middle; 3, high; 4, very high (only available in
models DS 80170 y DS 80190).
Auto-off: keep pushed the buttons
of 5 minutes. After 5 minutes, the motor and light will turn off automatically and will sound a whistle.
MAINTENANCE
Before cleaning the hood, ensure it is turned off and unplugged.
Cleaning of hood's outer
Use a soft cloth dampened with water and soft soap or domestic detergent. Never use metal scourer,
abrasive products or hard brush to clean it, it could scrape.
Monthly cleaning of grease filter
IMPORTANT: clean the filter each month to avoid risk of fire.
The filter collect grease, smoke and dust, so efficiency of hood depends of state of filter. If it is not clean, the
wastes of grease (potentially flammable) will block the filter. Remove it and immerse in water with soap or
detergent. After that, rinse and leave drying. Grease filter cannot be clean in dishwasher.
Annual change of carbon filter
Apply only to vent inside hood (not connected to outlet outside). This filter traps the odors and should be
changed once a year at least, depending how frequently you use the hood.
Change a light
This hood has LED light, therefore it is not probable to fail, in the case it happens, check with assistant
service to provide you the suitable spare part.
y for 1 second, the display will twinkle and will start a countdown
16