ENGLISH
New functions in firmware version 1.20
The following functions have been added in firmware version 1.20.
•
File operations have been added to the Quick menu
: function to protect files
CHANGE PROTECT
: function to clear all marks in a file
CLR ALL MARKS
•
A folder operation has been added to the quick menu
: function to delete empty folders
FOLDER DELETE
•
Ability to add marks manually during playback
•
Ability to clear specified marks
•
Function that adds marks automatically when the PEAK indicator lights
•
Ability to skip marks by type
•
Ability to record XRI information (4CH mode only)
•
Ability to show XRI information (4CH mode only)
•
Ability to delete XRI information (4CH mode only)
Protecting files (4CH mode only)
This function protects files to change them to read-only.
Select a file to protect on the
1.
BROWSE
Press the QUICK button to open the quick menu pop-up, and use the
2.
wheel to select
CHANGE PROTECT
Press the ENTER/MARK button.
3.
A
pop-up message appears to confirm that you want
SET PROTECT
to protect the selected file.
If the file has already been protected,
appear instead.
Press the ENTER/MARK button to protect the file and return to the
4.
screen. If the file has already been protected, this will remove
BROWSE
protection from it before returning to the
Press the 8/HOME button to cancel changing the protection status and
return to the
screen.
BROWSE
NOTE
•
All other files in the same project as the protected file will also be
protected.
•
Use the INFORMATION item in the
check protection status.
D01274400A
screen.
.
will
REMOVE PROTECT
screen.
BROWSE
screen quick menu to
BROWSE
DR-44WL
Clearing all marks (4CH mode only)
Select the file for which to clear all marks on the
1.
Press the QUICK button to open the quick menu pop-up, and use the
2.
wheel to select
CLR ALL MARKS
Press the ENTER/MARK button.
3.
The following confirmation pop-up message appears.
Press the ENTER/MARK button to clear the marks and return to the
4.
screen.
BROWSE
Press the 8/HOME button to cancel clearing the marks and return to the
screen.
BROWSE
Deleting empty folders (4CH mode)
Select the empty folder that you want to delete on the
1.
Press the QUICK button to open the quick menu pop-up, and use the
2.
wheel to select
FOLDER DELETE
Press the ENTER/MARK button.
3.
The following confirmation pop-up message appears.
NOTE
If the folder is not empty, a
NOT EMPTY
appear.
Press the ENTER/MARK button to delete the empty folder and return to
4.
the
screen.
BROWSE
Press the 8/HOME button to cancel deleting the folder and return to the
screen.
BROWSE
screen.
BROWSE
.
screen.
BROWSE
.
pop-up message will
1
TASCAM DR-44WL