orangebox On the Qt Guia Del Usuario página 5

Care of Fabric Upholstery
Please refer to fabric manufacturer cleaning guidelines.
Care of Aluminium and Steel
Any aluminum or steel parts can be cleaned with a damp cloth. In
the case of polished or chrome parts, buff dry with a soft
non-abrasive cloth to prevent streaks. For chrome plated finishes,
stubborn stains can be removed using a metal cleaner. Do not use
abrasive cleaning agents in case of damage.
Glass
Care of the glass once installed. Hand cleaning of the glass surface
to remove accumulated dust or finger prints can be accomplished
using a number of different glass cleaning products. Low content
vinegar based cleaners have the ability to provide a clean,
streak-free glass surface. Spray on a cleaning solution or with a
cloth saturated with the cleaning solution. Scrub the wet surface
with a clean, lint free cloth. Wipe dry with a dry, clean, lint free cloth.
Abrasive cleaners, powder based cleaners, scouring pads must not
be used to clean the glass.
Melamine (Tables) For general routine cleaning, apply a mild
non-abrasive soap solution to the melamine surface and wipe
clean with a soft, lint-free cloth. Rinse clean with a damp, lint-free
cloth and dry thoroughly. More stubborn stains including oil, vanish
or paint may be removed when rubbed with methylated or white
spirits. Then rinse tops clean with a damp lint free cloth and dry
thoroughly. Furniture polishes should not be used, as they can
result in the build-up of wax or silicone on the surface leaving
smears.
orangebox.com
Troubleshooting
Inlet fan not working
Check that the switch is set to the on position. For corded versions
where an inline fuse is supplied, check fuse and replace with an
approved rated fuse. Check that the main light or occupancy light are
operating. If fan is not working contact customer service or the dealer
Outlet fan not working
Check that the switch is set to the on position. For corded versions
where an inline fuse is supplied, check fuse and replace with an
approved rated fuse. Check that the main light or occupancy light are
operating. If fan is not working contact customer service or the dealer.
Task light light not working
Check that the switch is set to the on position. For corded versions
where an inline fuse is supplied, check fuse and replace with an
approved rated fuse. Check that the inlet and outlet fans or occupancy
light are operating. If light does not work contact customer service or
the dealer.
Occupancy light not working
Check that the switch is set to the on position. For corded versions
where an inline fuse is supplied, check fuse and replace with an
approved rated fuse. Check that the inlet and
outlet fans or task light are operating. If light is not working contact
customer service or the dealer.
Failure of Passive Infrared Switch
Check that the switch is set to the on position. If fans/lights are not
working, contact customer service or the dealer.
On
Off