Troubleshooting; Corrective Action; Warranty - Kobalt KCW 5024B-03 Manual Del Usuario

TROUBLESHOOTING

WARNING
• Turn the switch to the "OFF" position and remove the battery pack from the impact wrench
before performing troubleshooting procedures.
PROBLEM
The impact wrench
does not work.
The socket cannot be
installed.
The motor is
overheating.
The LED worklight
blinks rapidly.
The LED worklight
blinks slowly.

WARRANTY

5 Year Limited Tool Guarantee
For 5 years from the date of purchase, the impact wrench is warranted for the original
purchaser to be free from defects in material and workmanship. This guarantee does not
cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized
repair/alteration, or expendable parts and accessories expected to become unusable after a
reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
The battery pack is
depleted.
The socket does not fit the
sleeve.
Be sure cooling vents are
free of dust and obstacles.
The tool has stopped
working to protect internal
circuits.
The battery charge is very
low.

CORRECTIVE ACTION

Charge the battery pack.
Use a suitable adapter or claimed
capacity socket.
Clean and clear the vents. Do not
cover the vents with your hand during
operation.
Release the trigger switch, wait for
the tool to cool down, then and start
the tool again.
Charge the battery.
13
Printed in China