Kohler K–16070-4A Manual Del Usuario página 3

Centerpiece
Color Ring
Long
Endpiece
O-Ring
Screw
Handle
Lever Handle
Stem/Skirt
Spline Adapter
Escutcheon
1. Install the Handles
NOTE: Escutcheons are supplied with widespread faucet
applications only. Refer to the valve kit installation instruction for
escutcheon assembly procedures prior to installing handles.
Place a spline adapter on each valve stem.
Place a handle stem/skirt over each valve.
Align the eyelets in each handle stem/skirt so they point to the
other handle.
Fasten each handle stem/skirt to a valve stem using the
lockwashers and screws provided.
Use a 5/32" hex wrench to tighten.
Place each centerpiece onto the handle stem/skirt so the eyelet
holes are clearly visible.
Fasten each centerpiece in place by inserting two screws (flat
surface facing out).
Place one screw into each side of each centerpiece. Use a 5/32"
hex wrench to tighten.
Slip a color ring over the endpiece threads and onto the shoulder
of each endpiece.
NOTE: Use soapy water to lubricate the O-rings.
Slip the O-rings over the endpiece threads and onto the shoulder
of each endpiece.
Kohler Co.
Short
Endpiece
O-Ring
Color Ring
Screw
O-Ring
Color Ring
Screw
Endpiece
Screw
Lockwasher
Eyelets
Spline Adapter
Valve Stem
3
Endpiece
Color Ring
O-Ring
Screw
Centerpiece
T-Handle
112979-2-DB