Kohler K–16070-4A Manual Del Usuario página 6

Swirl
Handle
Spline Adapter
(Centerset
Faucet)
3. Install the Handles
NOTE: Escutcheons are supplied with widespread faucet
applications only. Refer to the valve kit installation instruction for
escutcheon assembly procedures prior to installing the handles.
Place a spline adapter onto each valve stem.
Place the appropriate color ring (red = hot, blue = cold) and
bonnet over each valve and press firmly against the escutcheon or
faucet body.
Partially install the handle adapter onto the spline adapter and
check the alignment of the handle.
Align the external flats of the handle adapter so they are parallel
to the faucet body or back edge of the fixture or wall. This can be
done by careful adjustment of the spline adapter and handle
adapter.
Fasten a handle adapter to each valve stem using a screw.
Set the handles on the handle adapters and thread a bonnet up
onto the handle threads until tight.
112979-2-DB
Square
Handle
Screw
Handle
Adapter
Bonnet
Color
Ring
Spline Adapter
(Widespread
Faucet)
Escutcheon
Valve
Stem
6 Kohler Co.