Kohler K–16070-4A Manual Del Usuario página 5

T-Handle
Aerator
Lever Handle
Button Cap
Long Screw
Long Screw
Aerator
Wrench
2. Install the Handles
Install vandal-resistant lever and T-handles using the installation
procedures on the previous page.
Thread a long screw through the endpiece until it is tight using a
5/64" hex wrench.
Press the plug button into the endpiece of each T-handle.
Install a vandal-resistant aerator into the spout using Kohler
Wrench #78868.
Kohler Co. 5 112979-2-DB