Uview - Samoa NEXU Manual Instalación

3. INSTALLATION AND CABLING

3.2.5 UVIEW

As per the UValve, there are two terminals (IN and OUT) for the CANBUS.
The device has 3 screen display modes, named "standby mode,
"standard" mode and "XXL" mode.
The "standby" mode (figure 1) is the display mode shown when no
transaction is in progress. While a transaction is being made, the screen
will show the "standard" mode (figure 2) or the "XXL" (figure 3)
according to the device configuration (see the "menu configuration"
section for more details).
Depending on the screen mode, the unit address (1), the fluid volume
dispensed (2), the progress status bar of the transaction (3) or the
indicator which shows that the solenoid valve is open (4), will be
displayed.
1
Regarding LEDS and buttons you can find:
• 1 - Address indication / Delivered quantity
• 2 and 3 - Configuration buttons
• 4 - Indication LEDS. From left to right Solenoid opening
indication, bypass indication,
End of Line indication.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
1
fig. 1
3 2
online CANBUS indication,
5
7
9
4
fig. 2
2
1 4
fig. 3
2 3
R. 06/21 838 861
EN
15