Wireless Installation - Samoa NEXU Manual Instalación

EN
3. INSTALLATION AND CABLING
For three-connectors UDat (See paragraph 3.2.1), a clear example of how to lay a wired installation can be seen in this figure:
In this case, you see only magenta wiring. This wiring carries power and communication.
Yellow wiring represents the customer computer network.
For Samoa cabling red and black wires are used for power and white, blue and screen are used for data.
NOTE: Although wiring colors could be used in another way, it is highly recommended to follow this rule.
3.1.2 WIreless
In this case the UNet is connected to a Wi-Fi Router (Samoa Supply) and it connects (and transfers information) to a UDat. This UDat powers up and
transfers information to the rest of the elements.
9
R. 06/21 838 861
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com