Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9.17 ANTI-REMOVAL TAMPER
JP1 JUMPER.
To use the anti-removal tamper,
break through the pre-arrangement
(see paragraph 5.0), onnect the
equipped
spring
to
corresponding micro-contact, and
remove the JP1 jumper. If you do
NOT intend to use the anti-removal
tamper, leave the JP1 jumper
connected (factory programming).
9.17 ANTI-REMOVAL TAMPER
JP1 JUMPER.
To use the anti-removal tamper,
break through the pre-arrangement
(see paragraph 5.0), onnect the
equipped
spring
to
corresponding micro-contact, and
remove the JP1 jumper. If you do
NOT intend to use the anti-removal
tamper, leave the JP1 jumper
connected (factory programming).
REAR VIEW
the
anti-removal
tamper
REAR VIEW
the
anti-removal
tamper
21
21
Publicidad
Tabla de contenido
