Balluff BML-R01-M Serie Instrucciones Breves página 4

BML-C02 and BML-R01-M_ _ _
Slide/Slide Rail - Guided Magnetic Linear Encoder System
Intended use
A linear encoder system is composed of a slide combined
with a sensor head (e.g. BML-S1F1-...) and a slide rail with
magnetic tape. The system is installed on a flat surface in a
machine or installation and connected to the moving
machine part by a guide arm. Flawless function in
accordance with the specifications in the technical data is
ensured only when using original BALLUFF accessories.
Use of any other components will void the warranty.
The information in these instructions must be observed,
particularly information related to installation. Improper use
will result in the loss of warranty and liability claims against
the manufacturer.
General safety notes
Installation and startup may only be performed by
trained specialists.
The operator is responsible for ensuring that local safety
regulations are observed. In particular, the operator must
take steps to ensure that a defect in the linear encoder
system will not result in hazards to persons or equipment.
If defects and unresolvable faults occur in the system, take
it out of service and secure against unauthorized use.
Left
Right
Direction of travel
Legend: a = slide rail; b = mounting holes for drag chain; c = slide; d = sensor head; e = fixing for joint rod; f = lugs;
g = magnetic tape with/without cover strip
1 english
Download further user's guides
A complete user's guide can be downloaded from the
Internet at www.balluff.com or requested via e-mail from
service@balluff.de.
Construction and function
The slide, in which the sensor head is mounted, is
connected via a guide arm to the machine part whose travel
is to be measured.
The slide is guided along the slide rail. During this process,
the sensor head measures the travel.
BML-C02 slide
System components:
– Slide
– Slide rail
– Magnetic tape
– Sensor head
Accessories
– Lugs
– Joint rod
Reference point
BML-C02
BML-R01-M_ _ _
BML-M02-I3_-...
(with/without cover strip)
BML-S1F1-...
BML-Z0008
BTL2-GS10-_ _ _ _ -A