Sam G-10 Instrucciones página 12

PHASE 7 - PLAYS PER GAME (DISPLAY: 7 PLAYS PER GAME):
The number of chances (plays) per game can be programmed between 1 and 10.
Enter the test (PRESS BUTTON) and see the programmed plays (by default 10 plays per
game). PRESS BUTTON to modify it till you get the desired number.
Exit moving the joystick right or left.
PHASE 8 - OPEN HOOK (DISPLAY: 8 OPEN HOOK):
There is an option for the machine to open the claw if the user wants to change the product
picked up by the claw. There will be two chances to do so along the game. If the user
press the button for more than one second the claw will open and drop the product.
Enter the test (PRESS BUTTON) and see if it is OFF (by default, deactivated) or ON
(activated). PRESS BUTTON to modify it.
Exit moving the joystick right or left.
PHASE 9 - ATTRACT MODE SOUND (DISPLAY: 9 SOUND OF LURE):
It is possible to activate/deactivate the attract mode sound.
Enter the test (PRESS BUTTON) and see if it is OFF (deactivated) or ON (by default,
activated). PRESS BUTTON to modify it.
Exit moving the joystick right or left.
PHASE 10 - SENSORS FUNCTIONING (DISPLAY: 10 SENSORS):
The test will show the proper functioning of the sensors and micros of the machine.
Enter the test (PRESS BUTTON).
With the carriage at the zero point the display will show: 2 ON.
To make the test, move the carriage to the centre with your hand, for all the sensors to be
deactivated. The display will show OFF
Moving the carriage to the different ends, the proximity sensors will change to active:
1- sensor front position
3- micro claw up
5- sensor left position
Exit moving the joystick right or left.
PHASE 11 - JOYSTICK FUNCTIONING (DISPLAY: 11 JOYSTICK):
The test will show the proper functioning of the joystick.
Enter the test (PRESS BUTTON). Move the joystick and the screen will show the direction:
DCHA, IZQU, ARRI, ABAJ - (RIGHT, LEFT, UP, DOWN).
Exit pressing the button again.
2- sensor back position
4- micro claw detects object
6- opto way out door (move door)
ENGLISH 6