Sam G-10 Instrucciones página 16

ENGLISH 8
PHASE 16- CONTROL OF THE HOOK (DISPLAY: 16 CONTROL OF HOOK):
With this test you can configure the movement of the claw when it goes down to pick up a
product.
Enter the test (PRESS BUTTON) and see if it is ON (by default) or OFF.
PRESS BUTTON to modify it.
ON: During the game, the claw will go down or stop each time the button is pressed or
released.
OFF: During the game, the claw will go down and pick up the product with just the button
pressed once.
Exit moving the joystick right or left.
PHASE 17- POWER OF THE HOOK (DISPLAY: 17 POWER OF HOOK):
Here we can change the strength of the claw, divided in 5 levels. The maximum strength is
5, and it is the default strength.
Enter the test (PRESS BUTTON). To change the strength press the button for more than 1
second. You can also change the strength raising or lowering the tension of the power
surce12V/24V.
The default values are optimized, and changing them is not recommended.
Exit moving the joystick right or left.
PHASE 18- LAST ERROR (DISPLAY: 18 LAST ERROR):
This test shows the last error occurred.
Enter the test (PRESS BUTTON).
Exit moving the joystick right or left.