Sam G-10 Instrucciones página 22

ENGLISH 11
7.- MAINTENANCE
Testing the proper functioning of the machine regularly is recommended.
Keep the deposit clean. Use a wet cloth without solvents or corrosive substances.
Replace the fuse with a similar one.
Verify periodically the earth connection and the vent system (clean).
Test periodically the proper functioning of the claw, moving it in the X and Y axis and
travelling up and down. Verify the rope of the pulleys.
Use always original SAM parts.
Only skilled personnel should access the active areas of the machine (PCB, Power
supply and electric network).
DOWNLOAD THIS INSTRUCTIONS FROM:
http://sambilliards.com/en/news/vending-cranes-instructions/
SAM CRANES RANGE: G-10, G-20, G-30/36, G-45/46